When streaming using a LiveU, it can be beneficial to connect to a local Wi-Fi to increase your signal coverage
Below are the instructions for connecting the LiveU Solo encoder to Wi-Fi. If you need full instructions on how to stream, please view this page instead: How-To: Start A Stream Using A LiveU Solo
💡 Please note that you can connect the LiveU Solo to a hotspot. However, it is always recommended to first try connecting to the Home or Business Wi-Fi.
Since hotspots are simply a cellular signal, sometimes their connection is not as solid a signal as the home or business Wi-Fi. Therefore, we always recommend that users first try connecting to home or business Wi-Fi and testing the strength of the stream before connecting the LiveU Solo to a hotspot. If you have access to an ethernet port instead, we recommend using ethernet first.
Instructions:
Follow these instructions to connect your LiveU Solo to Wi-Fi.
-
Make sure to plug your unit into a power supply, either from the wall or d-tap.
-
Turn on the LiveU by pressing the bottom power button.
-
When the LiveU is powered on, press the top button to the right.
-
Continue pressing to the right until the LiveU says Scanning.
-
Once it finds an available network, press down on the top button to select the Wi-Fi network.
-
Lastly, use the top button to navigate the keypad and enter the password. After completing this, the LiveU Solo encoder will be connected to the Wi-Fi.
That’s it!
Let us know if you have any feedback at support@mesuite.com
—Team MEsuite.
Join Our Community!
Join our Discord community to connect with other production people, ask questions, and be the first to know about updates and new features!
