Below are the instructions for how to connect the Audio to SDI Mini Converter to a DirectME stream.
💡 Please note that these instructions assume that you have already followed the proper procedures for connecting your cameras to your wireless systems and the wireless system to the Decimator. In this example, we’ll assume that you are using the Decimator Quad.
These instructions also assume you have properly powered all devices.
Overview
Follow these instructions
-
Make sure you have a cable in the SDI OUTPUT of the Decimator Quad.
-
Take the SDI cable from the SDI OUTPUT on the Decimator Quad and plug it into the the SDI IN on the Audio to SDI Mini Converter.
-
On the Audio to SDI Mini Converter plug an SDI cable into the SDI OUT port.
-
Take the SDI cable from the Audio to SDI Mini Converter and go SDI OUT and into the LiveU Solo Encoder.
-
Go back to the Audio to SDI Mini Converter, and plug the ¼ inch Y splitter cable into CH 1 ANALOG and CH 2 ANALOG.
-
The last step is to take the opposite end of the Y splitter cable (the ⅛ inch audio jack) and plug it into your IFB.
That’s it!
Let us know if you have any feedback at support@mesuite.com
—Team MEsuite.
Join Our Community!
Join our Discord community to connect with other production people, ask questions, and be the first to know about updates and new features!
